EdmontonPriced online, machined in Canada

CNC machining for Edmonton, Nisku and the Heartland

Highland is an online CNC machining service. We aren’t an Edmonton machine shop, and further down this page is a list of the jobs you should take to one. You upload a CAD model and see a price in Canadian dollars in seconds. A machinist reads the quote within one business day, and the firm price is the price you pay. The parts are cut in our partner shop in Canada, registered to ISO 9001:2015, and shipped to you in Edmonton, Nisku or Fort Saskatchewan.

The work around Edmonton, and the parts we make for it

The Industrial Heartland. Northeast of the city, the Heartland covers 582 km² and holds more than 40 companies making fuels, fertilizers, power and petrochemicals. Its own association calls it Canada’s largest hydrocarbon processing region, and the Edmonton region launched Canada’s first hydrogen hub in 2021. For that work we make flanges, adapters and valve components in 304 or 316 stainless, with passivation as an option, and in 1018 or 4140 prehard steel. On a flange, keep each bolt hole’s centre at least 1.5 × its diameter from the edge. Any closer and the thin wall outside the hole bulges when it’s drilled or the bolt is torqued.

Nisku and Leduc. South of the city, the Nisku and Leduc business parks build equipment for the energy industry. For tool components, adapters and fixtures, our size limit is 1016 × 508 × 508 mm. We also flag any part more than 8 times longer than it is wide, because a slender part bends under the cutter. Widen it or add a rib if you can, and we may leave stock to hold it while it’s cut. Long downhole and frac tool bodies belong with the Edmonton shops that build them.

Data centres and their power. Meta is building its first Canadian data centre in Sturgeon County, north of the city: a $13 billion campus with a 970 MW grid connection, cooled by a closed-loop liquid system with dry cooling (Government of Alberta, July 2026). For liquid cooling we cut manifold blocks, cold plate blanks and leak test fixtures from 6061 aluminum and C110 copper. Cold plate channels meet two of our limits: aluminum and copper walls under 0.8 mm get a second look and under 0.5 mm need changing, and a channel up to 4 × deeper than it is wide cuts cleanly, while past 10 × it can’t be cut as drawn.

The 932 MW Greenlight Electricity Centre is being built next door to help power the campus. For power work we machine busbar and switchgear hardware from C110 copper and C360 brass, with tin plate as an option.

Labs. The University of Alberta’s nanoFAB is a cleanroom facility for thin film deposition and plasma etch, used by academic and industrial researchers. For labs like these we make vacuum hardware, mounts and prototypes in 6061 aluminum, 304 or 316 stainless, titanium grade 5 and acetal. Inside corners come out at about R1.5 unless your drawing says otherwise. A truly sharp inside corner needs EDM, which we don’t offer.

Parts are held to ±0.005" as standard, and tighter when the drawing calls for it. A single part is fine. There is a minimum order, and an order under it is brought up to it.

Getting parts to Edmonton

Parts ship in 10 business days as standard. Expedited is 5 and rush is 3, with the days a finish adds on top. Your firm quote gives the ship date and the shipping cost, in Canadian dollars, before you commit.

Your parts stay in Canada the whole way, so there’s no customs broker, duty or counter tariff on the invoice.

When an Edmonton shop is the better call

Here is what Edmonton-area shops say on their own sites that they do and we don’t:

  • rebuild worn parts with thermal spray and HVOF coatings, then grind or hone them back to size
  • rebuild natural gas engines and compressors, and machine in the field
  • repair, recertify and pressure test valves
  • build downhole, frac and completion tools, and pins and bushings for mining and earthmoving
  • wire EDM, surface grinding, and Swiss turning for long production runs
  • remake a broken part that has no model, by reverse engineering it
  • welding and fabrication

Some of those shops invite you to walk in and see the machines. If you work on campus, ask your faculty’s own machine shop first.

The shops above quote from a form or a phone call. We fit when you have a CAD model of a new part and need one to a few hundred, in aluminum, copper, brass, steel, stainless, titanium or acetal, milled on three or five axes or turned, with the price on screen first. CNC machining materials prices the same part in each of those. If you’re comparing the big online services instead, we put them side by side.

Talking to a person

Your NDA covers our partner shop before it opens a file. To talk a part through, book a 20 minute video call with a machinist.

If the job needs paperwork, add it on the quote as a paid option: mill certs with heat numbers traceable to each part, a CMM inspection report, or a first article report.

Questions

Is Highland a machine shop in Edmonton or Nisku?

No. We’re an online CNC machining service built in Fort St. John, BC. Your parts are cut in our partner shop in Canada and shipped to you. For repair, coating, field work or a part with no model, an Edmonton shop is the better call.

What does shipping to Edmonton cost?

We ship anywhere. Your firm quote gives the shipping cost in Canadian dollars, with the ship date, before you commit.

Can you supply material certs for plant work?

Yes, as a paid add-on. A CMM inspection report and a first article report are paid add-ons too. Take what your job needs.

Upload a model and see the price in Canadian dollars, or read the limits by material in the design guidelines first.

For other cities: CNC machining for Calgary and CNC machining for Vancouver.