CNC machining for Vancouver, priced in Canadian dollars
Highland is an online CNC machining service built in Fort St. John, BC. We aren’t a Vancouver machine shop. You upload a model, see a price in Canadian dollars in seconds, and a machinist checks the quote within one business day. The parts are cut in our partner shop in Canada, registered to ISO 9001:2015, and shipped to you.
Hydrogen, labs and robots: what we make for Vancouver
Hydrogen and fuel cells. Invest Vancouver, the region’s investment agency, says more than half of Canada’s hydrogen and fuel cell companies are in BC. The companies it lists in Metro Vancouver make fuel cells, hydrogen equipment and hydrogen itself. For that work we make leak test fixtures, manifold blocks, adapters and valve components, in 316 stainless or 6061 aluminum. A stainless wall under 1.0 mm gets a second look, and under 0.6 mm it can’t be cut as drawn. Each port needs its centre at least 1.5 × its diameter from an edge, or the wall beside it bulges when the hole is drilled or a fitting is torqued.
Labs and research. TRIUMF, Canada’s particle accelerator centre, is in Vancouver, and Invest Vancouver lists clean energy and hydrogen research at UBC and SFU. Lab work often needs one of a part, not fifty: vacuum hardware, mounts and prototypes, which we make in 6061 or 7075 aluminum, 304 or 316 stainless, C110 copper and grade 5 titanium. In 7075, floors and walls under 1.5 mm can bow 0.1 to 0.5 mm once cut free, so keep them thicker or we stress relieve and finish in two passes. Inside corners keep the cutter’s radius, about R1.5 unless you say otherwise; a dead sharp inside corner needs EDM, which isn’t on our list. Some lab metals aren’t either: TRIUMF’s own machine shop cuts tantalum, niobium and molybdenum, and we don’t.
Robotics and hardware. Invest Vancouver counts more than 180 companies in the region building AI and machine learning products, and robotics is one of the specialties it lists. Robots need brackets, housings, gripper fingers and fixture plates, which we make in 6061, 7075 or acetal. Watch the threads in plastic: a tapped hole in acetal needs 2.5 × the thread diameter of engagement, 15 mm for an M6, so a short finger wants threaded inserts. Aluminum needs 1.5 ×, or 9 mm. A pocket in a housing cuts cleanly up to 4 × deeper than it is wide.
What a bracket costs. One of the test parts we check our quote engine against, not a customer’s, is a bracket, 80 × 60 × 18 mm, milled from the top and the bottom with one tapped M5 hole and two counterbored ones. Ten in 7075 aluminum come to each, and ten in acetal to each. One in 7075 is : the first part carries the whole setup, which is why a single prototype costs so much more than each of ten. That’s at standard tolerance, 10 business days, as machined, in Canadian dollars before tax and shipping, on the 3-axis mill at an hour. All our hourly rates are on CNC machining cost.
We make parts up to 1016 × 508 × 508 mm (40 × 20 × 20 in), held to ±0.005" or tighter, milled on three or five axes or turned. The design guidelines list every check, by material, and CNC machining materials prices the same part in each grade we cut.
Ordering online from Vancouver
Search for a CNC machining quote from Vancouver and much of the first page is online services. The big ones also do 3D printing, sheet metal and injection molding, quote more materials and bigger parts than we do, and state shorter lead times than our 10 business days. For a printed or sheet metal part, use one of them.
Before you order from any of them, us included, ask four things:
- Which country is the part cut in?
- What currency is the invoice in?
- Are duty, brokerage and any counter tariff in the price, or billed when the box arrives?
- Does a person read your drawing before the part is cut?
Our answers: Canada; Canadian dollars; no duty, brokerage or counter tariff on your parts, because they don’t cross a border; and yes, a machinist reads it within one business day. We put the big services’ own answers side by side, from their own sites.
One more thing to ask: the minimum. A single part is fine with us. There is a minimum order, before tax and shipping, and an order under it is brought up to it.
Getting parts to Vancouver
Parts ship in 10 business days as standard, 5 expedited and 3 on rush, plus the days a finish adds. Your firm quote gives the ship date and the shipping cost, in Canadian dollars, before you commit.
When a Lower Mainland shop is the better call
Search “machine shop” from Vancouver and the map shows local shops. Much of what shops in and around Vancouver offer is work we don’t do:
- engine machining on blocks, heads and crankshafts, and brake drums and discs you can drop off at a counter
- propeller shafts, couplings, stern bearings and rudder parts for boats
- gear cutting, and parts for heavy construction, marine, mining and forestry equipment, some kept in stock
- surface grinding, assembly, and kanban management for production runs
- welding to CWB certification, laser and plasma cutting, and forming sheet and plate
If your job is one of those, or you’d rather hand a worn part across a counter, call a Lower Mainland shop.
Where we fit: a new part from a CAD model, one to a few hundred of them, milled on three or five axes or turned, with the price on screen before anyone calls.
Talking to a person
Every quote is read by a machinist within one business day, and the firm price is the price you pay. Your NDA covers our partner shop before it opens your files. To talk it through, book a 20 minute video call.
Paperwork is a paid option on the quote: material certs, a CMM inspection report, or a first article report.
Questions
Is Highland a machine shop in Vancouver?
No. We’re an online CNC machining service built in Fort St. John, BC. Your parts are cut in our partner shop in Canada and shipped to you. For engine work, marine parts or anything you want to hand across a counter, call a Lower Mainland shop.
What does shipping to Vancouver cost?
We ship anywhere. Your firm quote gives the shipping cost in Canadian dollars, with the ship date, before you commit.
Do you make one-off prototypes?
Yes, from one part to a few hundred. One part costs more than each of ten because it carries the whole setup, and there is a minimum order of , before tax and shipping. CNC machining cost shows two test parts at 1, 10, 50 and 100.
Upload a model to see the price in Canadian dollars, or read the design checks first.
For other cities: CNC machining for Calgary and CNC machining for Edmonton.