CNC machining for Toronto and the GTA, priced from your model
CNC machining for Toronto and the GTA, priced online: Highland isn’t a Toronto machine shop, and we have no address in the GTA. We’re an online CNC machining service built in Fort St. John, BC. You upload a model, see a price in Canadian dollars in seconds, and a machinist checks the quote within one business day. The parts are cut in our partner shop in Canada, registered to ISO 9001:2015, and shipped to you in Toronto.
Cars, aircraft, devices and labs: what we make for Toronto
Cars, and the plants that build them. Three of Ontario’s vehicle assembly plants are in the Toronto economic region: Oakville, being retooled; Oshawa; and Brampton, idled (Government of Canada Job Bank, February 2026). In 2021 the region held 29,565 jobs making vehicles, bodies, trailers and parts. That’s 29.4% of Ontario’s, the most of any region in the province. A plant that retools needs fixture plates, locating blocks, brackets and gripper fingers, in ones and tens rather than thousands. We make them in 6061 aluminum, 1018 or 4140 prehard steel, and acetal, with black oxide on steel as an option. We find the sides a tool must come from to reach every face. That count is the number of setups, and it sets much of the price, as CNC milling shows. We look at a part when more than 0.3% of its surface is out of reach from every side, and past 3% it needs the 5-axis mill or a change to the model.
What a bracket costs in aluminum and in steel. One of the test parts we check our quote engine against, not a customer’s, is a bracket, 80 × 60 × 18 mm, milled from the top and the bottom with one tapped M5 hole and two counterbored ones. Ten in 6061 aluminum come to each, and ten in 4140 prehard steel to each. One in 6061 is : the first part carries the whole setup. That’s at standard tolerance, 10 business days, as machined, in Canadian dollars before tax and shipping, on the 3-axis mill at an hour. All our hourly rates are on CNC machining cost.
Aerospace. Invest Ontario counts more than 200 aerospace firms in the province, and says three of the world’s top landing gear companies make full gear or major components in Ontario. In Toronto, the Downsview site in North York is home to DAIR, a consortium of aerospace companies, universities and colleges. For that work we make test rigs, fixtures, brackets and research hardware in 7075 aluminum and grade 5 titanium. Titanium cuts slower than anything else on our list, so it costs the most in machine time; CNC machining materials prices the same part in each grade. Titanium walls get a second look under 1.0 mm and can’t be cut as drawn under 0.6 mm.
Medical devices. Toronto’s life sciences sector employs more than 30,000 people, and the City counts about 13% of those jobs in making medical instruments, equipment and supplies. Device work starts with prototypes, housings, test fixtures and bench hardware. We make them in 6061 aluminum, 304 or 316 stainless with passivation as an option, grade 5 titanium and acetal. A small inside corner deep in a housing needs a long, thin cutter: we look at it when the pocket is more than 4 × the cutter’s diameter deep, and past 10 × the cutter breaks. Open the radius to at least 1/8 of the pocket’s depth, or make the pocket shallower. Our partner shop is registered to ISO 9001:2015, and that’s the only quality standard we state. If your purchase order names another, ask us before you order.
Labs, hospitals and universities. Downtown, the Discovery District holds the University of Toronto, Toronto Metropolitan University, the MaRS Centre and several hospitals. About a third of the city’s life sciences jobs (32.3%) are researchers paid by hospitals. The University of Toronto Robotics Institute calls its program the largest and most diversified robotics research program in Canada. Lab work tends to need one of a part: mounts, adapters, robot brackets and housings, often in 6061 or acetal. Send the drawing with the model, as a PDF or a photo. It’s read for the material, finish, tolerances, threads, GD&T and notes, and the quote shows anything that differs from what you picked, such as a drawing that says 7075 on a part quoted in 6061.
Food and beverage. The Toronto region’s food and beverage makers employ more than 64,000 people, more than half of them at businesses in the city itself, and bakeries hold the largest share of those jobs, 34.5% (City of Toronto). Their lines run on change parts, guides, brackets and shafts, which we make in 304 or 316 stainless or in acetal. Acetal flexes under the cutter, so acetal walls get a second look under 1.5 mm and need changing under 1.0 mm. We cut to your drawing and don’t certify parts for food contact. If a part touches food, a material cert, a paid option, records the grade it was cut from.
We make parts up to 1016 × 508 × 508 mm (40 × 20 × 20 in), held to ±0.005" as standard and tighter when the drawing calls for it, milled on three or five axes or turned. The design guidelines list every limit we check, by material.
Ordering online from Toronto
Upload a STEP, IGES, Rhino (3DM) or ACIS (SAT) file and the price shows in seconds, in Canadian dollars before tax and shipping. It’s worked out in your browser, and nothing is sent until you ask for a firm quote. STL and DXF work too. Parasolid and native SolidWorks or Inventor files go to a machinist for pricing.
The clock is what’s different from Toronto. Highland keeps Mountain Standard Time (UTC−7) all year, and Toronto keeps Eastern time (UTC−5 in winter, UTC−4 in summer). So we’re two hours behind you in winter and three in summer, from the second Sunday in March to the first Sunday in November.
The machinist’s one business day is counted on our clock and our calendar. When you send a request, the email that confirms it names the day your firm price is due: the next business day, by the end of our day. Our day ends two or three hours after yours, so a firm price can come in after your office has closed, and be waiting for you the next morning.
Our business days follow BC’s statutory holidays, not Ontario’s. September 30 and Remembrance Day are holidays for us, and neither is a public holiday under Ontario’s Employment Standards Act. A due day or a ship date counts past them.
The big online services also do 3D printing and sheet metal, which we don’t, and some state shorter lead times than ours. Before you order from any of them, us included, ask which country the part is cut in, what currency the invoice is in, and whether a person reads your drawing before it’s cut. We put their own answers side by side.
Getting parts to Toronto
We ship anywhere. Parts ship in 10 business days as standard, 5 expedited and 3 on rush, plus the days a finish adds. Your firm quote gives the ship date and the shipping cost, in Canadian dollars, before you commit.
Your parts don’t cross a border on the way, so there’s no customs broker, no duty and no counter tariff on the invoice.
When a GTA shop is the better call
Shops across the GTA do a lot of work we don’t. From their own pages and listings:
- engine rebuilding, with crankshaft grinding and engine balancing, for gas and diesel engines
- repair of industrial machines
- gear cutting: spur, bevel, helical and worm gears, some sold from stock
- large parts on boring mills with 42 feet of travel under a 50 ton crane, machine bases and frames, and large weldments
- production runs into the thousands, Swiss-style turning, cleanroom assembly and inventory management
If your job is one of those, or you need to walk in with a broken part this afternoon, call a GTA shop. Who they are and what each one does, A to Z: machine shops in Toronto.
Where we fit: a new part from a CAD model, one to a few hundred of them, milled on three or five axes or turned, with the price on screen before anyone calls.
Talking to a person
Every quote is read by a machinist within one business day, and the firm price is the price you pay. Your NDA covers our partner shop before it opens your files. To talk it through, book a 20 minute video call. Calls start between 9 a.m. and 3 p.m. Fort St. John time: 11 a.m. to 5 p.m. in Toronto in winter, and noon to 6 p.m. in summer. The booking form shows each time in yours.
Paperwork is a paid option on the quote: material certs, a CMM inspection report, or a first article report.
Questions
Is Highland a machine shop in Toronto?
No. We’re an online CNC machining service built in Fort St. John, BC, with no address in Toronto. Your parts are cut in our partner shop in Canada and shipped to you. For engine work, a machine repair or a part you want to hand over in person, call a GTA shop.
What does shipping to Toronto cost?
We ship anywhere. Your firm quote gives the shipping cost in Canadian dollars, with the ship date, before you commit.
What does the time difference mean for my quote?
Fort St. John is two hours behind Toronto in winter and three in summer. The machinist’s check is counted in our business days, and the email that confirms your request names the day the firm price is due. It can come in after your office has closed.
Do your business days match Ontario’s holidays?
Not quite. We keep BC’s statutory holidays, so September 30 and Remembrance Day aren’t business days for us, though neither is a public holiday under Ontario’s Employment Standards Act. A due day or a ship date counts past them.
Is there a minimum order?
Yes: an order, before tax and shipping. A single part is fine: an order under the minimum is brought up to it. The details are on CNC machining cost.
Upload a model to see the price in Canadian dollars, or read the design checks first.
For other cities: CNC machining for Calgary, CNC machining for Edmonton and CNC machining for Vancouver.